Tips & Tricks - Ensuring A Smooth New Shower Unit Installation

Tips & Tricks - Ensuring A Smooth New Shower Unit Installation

Blog Article

Contact Us

What're your ideas regarding How to Install a Freestand?

A successful shower installation requires careful preparation as well as a lot of work. In most cases, you will require to do 3 kinds of tasks: framing wall surfaces, setting up the plumbing, as well as ending up wall surfaces.

Prep work

Firstly, you have to pick the kind of shower that you want to install. It is important to identify whether the selected shower is capable of handling specific systems and also can control a secure level of water via the central heating boiler. Most shower systems nowadays are designed to be versatile to various water stress (such as stored warm water and also cold keys).
It is likewise essential to consider the water pressure as well as the planning of the piping and also drain for the shower

Different Sorts Of Shower Units

Push-on Mixer: The hose and also spray parts of the push-on mixer shower system can be connected to the bathroom tap according to your requirement, and also the water temperature can be readjusted through the faucets. Push-on mixers are cheap as well as extremely basic to install. Nevertheless, although the hose link is simple, it is conveniently dislodged. In addition, it is inconvenient to change the temperature level.

Bath/Shower Mixer: The hose as well as spray of this sort of shower are integrated with a bathroom mixer tap, and also the temperature can be changed via the bath faucets. It is an extremely economical choice and also no extra plumbing is entailed. Nonetheless, the bath/shower mixers likewise deal with inconvenient temperature level control options.

Handbook Mixer: The pipe and also spray of a hands-on mixer shower device are a part of the wall surface device and the cold and hot water supplies are linked to a solitary shutoff The temperature as well as stress of the water are regulated through either one or a range of handles (in much more costly showers). Although temperature level control is much easier in hands-on mixer kinds, they are extra expensive than the previously pointed out mixers. They also require extra plumbing of cold and hot water pipelines.

Thermostatic Mixer: The hose as well as spray of this shower kind are a part of the wall surface device and the hot and cold water materials are attached to a single valve right here also. It is full with a built-in stabiliser to self-adjust the water temperature as well as to stop it from coming to be too hot. One of the greatest benefits of a thermostatic mixer shower kind consists of convenient temperature control. Nevertheless, it is one of the most pricey of the various mixer options.

Power Shower: A power shower is a single system consisting of an effective electrical pump that can modifying both the water stress and also temperature. This type of shower can be fitted if there is water supply from a cold water tank and also a hot water cylinder. A power shower makes the adjustment of both pressure and temperature easy. On the other hand, it is unsuitable for water heated directly by the shower or where the water is supplied by a combination central heating boiler under keys pressure.

Electric Shower: An electric shower is plumbed into a mains cold water supply and it heats the water electrically. It is important to note that for this shower type to be installed, the mains pressure needs to be at least 0.7 kg/sq cm (10lb/sq in). The unit allows the temperature level and also stress to be readjusted using a handle. Versions with temperature level stabilisers are much better as they stay unaffected by other taps somewhere else in use within the household. A significant downside of electrical showers is that the control knob only allows for the option of high temperatures at much less stress, or reduced temperatures at a greater pressure. This is bothersome in the winter when the spray is commonly weak as well as the mains water is colder. However, this trouble is taken on in some designs which are offered with a winter/summer setting.

Approach

Relying on the kind of shower you wish to mount, the shower head have to either be fitted in order to avoid its contact with the water in the bathroom listed below or the base tray, or it needs to have a check valve.
Prior to beginning, it is a good idea to mark the positions of the shower head as well as control, and to plan the pipe-work entailed. Furthermore, the drain system to get rid of the drainage will require to be intended. Both placements of the cord route and also the shower button will additionally require to be thought about if an instantaneous or electrical shower system is being installed.
Make use of the direction guide supplied with the shower system to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is necessary to remove the water supply. In order to shield the pipes, they should be provided a waterproof covering as well as likewise fitted with separating valves. The pipes can then be hidden into the wall and also glued over to neaten the overall appearance.
Fit the base tray, shower head, as well as fittings.
Attach the primary shower control to the pipes that will be providing the water (This might require a women screw thread adapter).
Reconnect the water supply as well as test the pipelines for any leakages, as some may need firm.
If you are mounting an electrical shower, bear in mind to switch off the electrical energy supply before making any type of electric connections. As soon as these connections have actually been made (there should be support within the instruction manual), the power supply can be changed back on.

Readjusting Water Pressure to Match Your Shower

The cold water reservoir can be raised to a better height (often as little as 150mm (6inches)) by fitting a solid wooden assistance under it - possibly composed of struts and blockboards. If you pick this option, the primary and also distribution pipelines will additionally have to be increased to fulfill the new elevation of the reservoir.
Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is picked, it must be linked right into the power supply in order to operate.

Piping and also Drainage

It is best to utilize 15mm size supply pipes, as well as make the go to the shower as short as well as straight as possible so as to keep maximum pressure and also reduce heat loss. In addition, by reducing the use of arm joints for pipeline edges, you can lower the resistance in the flow of the supply of water. You can accomplish this by flexing the pipelines rather.

Most Typical Errors

Breaching or overlooking neighborhood code restrictions.

Using pipes that are too little.

Connecting copper to galvanized without utilizing a brass or dielectric suitable in between both.

Not making use of tape or pipe compound at threaded joints.

Not leveling your fixtures when installing them.

Not setting up an air space filling up for components.

Reducing supply stub outs also brief to mount the shutoff valves onto after the ended up wall surface remains in area.

Not properly aligning tubes right into fittings or quit shutoffs. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will certainly create a leakage.).

When transforming the water back on in your house, constantly run the outdoors pipe shutoff or purge your bathrooms to hemorrhage dirt as well as air from the lines. This debris can cause problems in your sink faucets and other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you enjoyed our piece about How to Install a Direct-to-Stud Shower Enclosure. Thanks a ton for spending some time to browse our article post. So long as you liked our blog posting if you please don't forget to pass it around. Many thanks for your time. Visit us again soon.

Set An Appointment

Report this page